Facebook

Twitter

Blog

01376 333308
Overview Benefits Technical Applications Chemical Resistance Quotation

Spillage Containment (Trays and Drum Bunds)

Overview

Legislation now requires the storage of hazardous materials and oils by use of spillage trays or a bund.

The original definition of a bund is ‘a wall of earth or brick which will contain oil, silt or other similar liquids, to contain them in the event of a spillage’. The current definition is the provision of liquid collection facilities, which in the event of any leak or spillage from tanks or pipe work will capture well in excess of the volume of liquids held within the bund area.

All these spill products are produced using fibreglass. The Intermediate Bulk Container (IBC) bund stands incorporate technology used to produce military craft and wind turbines. This is a proven method of construction and therefore means that the products are extremely durable and able to even withstand impact.

Key Features

  • Legislation Compliant
  • Chemical Resistant
  • Impact Resistant
  • Multi Drum options
  • Bucket Fill Facility
  • Lightweight

Spillage Containment


Benefits

Legislation Compliant
The current Legislation states: You are required to store all hazardous materials and oils within a bund/spill tray. The guidelines further state that a single drum should be stored on a spill tray capable of containing 25% of the volume. Multiple drums and IBC's should be contained within a bund capable of holding 110% of the largest container or 25% of the total volume, whichever is greater. The NonSlip range of spillage containment products ensures that these requirements are met.

Click here to see the Government regulations

Chemical Resistance
All products are produced from GRP materials that are chemical resistant to a wide range of chemicals. GRP (Glass Reinforced Polyester) also known as Fibreglass is non-corrosive and has a much longer life expectancy when compared to a variety of construction materials. In highly corrosive environments fibreglass is the preferred choice over metal, wood, or plastic. A popular choice where exposure to harsh environments is a concern, Fibreglass provides resistance to ultra violent light, extreme temperatures, salt air, and a variety of chemicals including most acids. Because fibreglass is chemically inert and corrosion-resistant, it offers an economical alternative to stainless steel.

High Quality Impact Resistance
All products are produced using resins and fibreglass reinforcements (see GRP) and this proven method of material construction means that the products are extremely durable and exceptionally strong.

Lightweight
The Drum Bunds and IBC units are exceptionally lightweight compared to other traditional materials which means the units, when empty, can be easily moved around with minimal effort.

Spillage Containments

Technical

Spillage Containment

Single Drum Spill Tray (SDST)

  • Nominal Capacity: 55 Litres
  • Actual Capacity: 55 Litres
  • Maximum Load: 500 kg
  • Weight: 16 kg
  • Grating thickness: 25mm
  • Spill Tray Colour: RAL 6001
  • Grating Colour: RAL 1003

Spillage Containment

Two Drum Spill Tray (2DST)

  • Nominal Capacity: 205 Litres
  • Actual Capacity: 255 Litres
  • Maximum Load: 1000 kg
  • Weight: 28 kg
  • Grating thickness: 25mm
  • Spill Tray Colour: RAL 6001
  • Grating Colour: RAL 1003

Spillage Containment

Four Drum Spill Tray (4DST)

  • Nominal Capacity: 205 Litres
  • Actual Capacity: 265 Litres
  • Maximum Load: 2000kg
  • Weight: 50 kg
  • Grating thickness: 25mm
  • Spill Tray Colour: RAL 6001
  • Grating Colour: RAL 1003

Spillage Containment

IBC Bund Stands

  • Nominal Capacity: 1000 Litres
  • Actual Capacity: 1100 Litres
  • Maximum Load: 2000 kg
  • Weight: 52 kg
  • Grating thickness: N/A
  • Spill Tray Colour: RAL 6001/1003
  • Grating Colour: N/A

Measurements:
1 Drum Spill Tray - 850mm x 850mm x 160mm
2 Drum Spill Tray - 850mm x 1410mm x 440mm
4 Drum Spill Tray - 1410mm x 1410mm x 260mm
IBC Bund Stand - 1580mm x 1990mm x 260mm


Applications

 
Spillage Containment Spillage Containment Spillage Containment
Spillage Containment Spillage Containment Spillage Containment
Spillage Containment Spillage Containment Spillage Containment

Chemical Resistance Tables

Fixing kits are available for all Non-Slip Safety Products.
Please remember to specify them when asking for a quotation/ placing an order.

Type 1: Glue/ screws/ plugs (recommended)
Type 2: Glue only (an industrial/ waterproof glue)

 

 

 

Menu Bar Back a Page Top of Page Start at Home Page

Copyright © 2012 NONSLIP. All rights reserved.